Lybrary.com: ebooks and download videos
Home / Magic / Comedy Magic

Watch Winder: noise maker

by Chris Wasshuber
$12.50

| £10.23 | 11.58 | C$16.92 | AUD$18.79 | 865.00 | CN¥86.00 | JP¥1375.94 | R$48.13

 add to wish list
Watch Winder: noise maker by Chris Wasshuber
This little tool produces a clicking or ratcheting noise and is typically used for comedy bits to wind up a watch or crack somebodies arm or neck and other bits.

The starting design came from Randi Middleton who gave me permission to use it anyway I like. I have made several changes to the design, rounded some corners and edges so that it feels better in the hand. Since I am using a stronger material I also could thin up the walls to make it slimmer and I optimized the tongue shape to maximize the noise. I also improved 3D printability. The biggest change is in my use of materials. The housing including the tongue is made from a sturdy semi-transparent material that is not too stiff to allow the tongue to be flexible enough but not too much. If one would print this from PLA or ABS the tongue will likely break at some point. The gear or wheel is made from a very stiff material to increase the noise this watch winder makes.

[Please note that 3D printed parts can have minor imperfections.]

The video below does not do justice to the noise it produces, but at least you see how it looks and how large it is.


SHARE   share via email share on facebook share on twitter share on linkedin share links
or call in the US toll free 1-888-866-9150 product ID: 833347

This product is listed in the following categories:

Magic / Comedy Magic

Magic / [3D Printed Tricks & Gimmicks]

If you find anything wrong with this product listing, perhaps the description is wrong, the author is incorrect, or it is listed in the wrong category, then please contact us. We will promptly address your feedback.

© 2019 Lybrary.com