ebooks and download videos
Home / Nonfiction / 3D Printing

Master Spool with Cover

by Chris Wasshuber
#2 Gambling author
STL | by download [1.70 MByte]   add to wish list
Master Spool with Cover by Chris Wasshuber
This is a remix of the Master Spool concept by RichRap to include a dust cover. I think the spool should also be the filament container. It keeps everything small, compact, and dirt free. By closing all the holes on the side of the Master Spool and adding a sleeve that slides around the spool we can accomplish this. It keeps dust away from the filament. It also avoids having a coil of filament jump over the spool rim and cause a filament jam.

To have filament feed out of the spool two screws are loosened so that the cover can freely rotate around the spool. For storage the screws are tightened, which completely closes the cover, and prevents filament from being able to exit the spool. It also keeps air exchange to a minimum. While this is not an airtight design I think with the right material for the cover it could be made into an airtight enclosure.

STL files for the two part spool and two part cover are included. To assemble you will need a short piece of PTFE tube, an M3 setscrew to hold the PTFE tube in place, and four short M5 screws to assemble the cover, and close or open the cover. The PTFE tube is not essential, but as you can see in the photo it nicely bridges the gap from spool to extruder entry and thus keeps filament completely enclosed and away from dust.

SHARE   share via email share on facebook share on twitter share on linkedin share links
or call in the US toll free 1-888-866-9150 product ID: 922543

If you find anything wrong with this product listing, perhaps the description is wrong, the author is incorrect, or it is listed in the wrong category, then please contact us. We will promptly address your feedback.

© 2020