A set of 30 traces for the miniTesla prototyping system. These connections can be put either directly below or above the pegboard and are mechanically secured as well as electrically connected with our spring contacts. You will get two of each kind. Included are:
- 2x 9 holes long
- 2x 8 holes long
- 2x 7 holes long
- 2x 6 holes long
- 2x 5 holes long
- 2x 4 holes long
- 2x 3 holes long
- 2x 2 holes long
- 2x 3 holes in triangle configuration
- 2x 2 holes + diagonal on one end (L-shape)
- 2x 3 holes + diagonal on one end (L-shape)
- 2x 4 holes + diagonal on one end (L-shape)
- 2x 5 holes + diagonal on one end (L-shape)
- 2x 2 holes + diagonal on both ends (C-shape)
- 2x 3 holes + diagonal on both ends (C-shape)
The connection between these traces and our spring contacts is very good only about 12 mOhm. Putting 36 of such connections in series only resulted in a total resistance of 9.4 Ohm
You can construct a sorting storage box for these traces from Lego. That way, you will readily have the necessary lengths for your building projects.
With a bit of thought and experimentation, one can use these traces to construct switches and other electromechanical components. Due to their thinness, these traces are flexible.
