Traces in miniTesla

10 3-hole corner traces for the miniTesla prototyping system. These traces can be put either directly below or above the board and are mechanically secured as well as electrically connected with our spring contacts.

10 traces for the miniTesla prototyping system each 3 holes long. These traces can be put either directly below or above the board and are mechanically secured as well as electrically connected with our spring contacts.

10 traces for the miniTesla prototyping system each 5 holes long. These traces can be put either directly below or above the board and are mechanically secured as well as electrically connected with our spring contacts.

10 traces for the miniTesla prototyping system each 7 holes long. These traces can be put either directly below or above the board and are mechanically secured as well as electrically connected with our spring contacts.

10 traces for the miniTesla prototyping system each 9 holes long. These traces can be put either directly below or above the board and are mechanically secured as well as electrically connected with our spring contacts.

A set of traces for the miniTesla prototyping system. These connections can be put either directly below or above the board and are mechanically secured as well as electrically connected with our spring contacts. Included are:

• 2x 9 holes long
• 2x 7 holes long
• 2x 5 holes long
• 2x 3 holes long
• 2x 3 holes around the corner